| Customization: | Available |
|---|---|
| Certification: | ISO, RoHS |
| Usage: | Combustible & Explosive Area, Computer Room, Electronic Component Maintenance Room, Printing Workshop |
|
Still deciding? Get samples of US$ 80/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Conductive Door Curtain Width 2m * Height 1m Diameter 6mm Static Conductive Stainless Steel Bead Curtain
|
|
|
Material:
|
Stainless Steel
|
|
Color:
|
Stainless Steel color
|
|
Size:
|
Width 2m * Height 1m or Customized Sizes
|
|
Diameter:
|
6mm
|
|
Spacing:
|
8cm
|
|
Accessories:
|
Installation Screws and Grounding Wire Accessories
|
|
Applicable scope:
|
Widely applicable to electronic factories, oil depots, explosive depots, coal mines, and areas particularly sensitive to static
electricity Conductive facilities in flammable and explosive locations such as oil tankers, chemical warehouses, warehouses, electronic industries, locations, and underground mines. |
|
Safety precautions for use:
|
1. When making door curtains or connecting equipment, they must be connected to grounding devices. 2. Material performance:Polymer
synthetic conductive electronic watch fiber, with excellent conductivity and stable performance, is a permanent conductive fiber. 3. Conductive ropes should be properly kept and stored. In summer, it should not be exposed to the scorching sun for a long time, nor should it be stored near high-temperature heat sources for a long time. 4. After this product is stained, wipe it with a clean damp cloth. Do not use a knife or sharp tool to scratch it during use. |
|
Performance of anti-static rope:
|
1. Electric rope structure: The outer layer is interwoven with black, white, and green colored fibers, and the inner layer is
wrapped with white yarn. 2. Performance: The anti-static rope can be made into an anti-static door curtain, which has the function of discharging static electricity. It has good conductivity and can instantly introduce static electricity into the ground in an uncharged state. 3. Usage: Fix and hang one by one at the entrance of personnel entry and exit. When personnel enter and exit, they come into contact with the anti-static rope, and use the anti-static rope to guide away static electricity from the human body, thereby eliminating static electricity from the human body and achieving good anti-static effect. 4. Surface resistance: 10 ^ 52-10 ^ 7 see. 5. Common specifications: diameter 4mm, 6mm, 8m, etc., 50m/roll or 100m/roll. |
|
Method of making anti-static rope door curtains:
|
1.The width and height of the inner door should be measured to calculate the total length of the rope required. The calculation
basis is: the spacing between each rope of the anti-static door curtain is 2m-10m (usually 5m), and the length should be around 1 meter above the ground after hanging. 2. Cut the rope section by section according to the required length, and then fix both ends of the cut rope with suitable copper terminals (one end can also be fixed with copper terminals, and the other end can be fixed with a dedicated copper pendant or directly knotted). 3. Cut aluminum alloy profiles or copper plates with grooves according to the width of the door, press the copper terminal at one end of the prepared anti-static rope into the aluminum alloy groove "Copper plate needs to be drilled and fixed", and fix the copper plate according to the selected spacing. 4. Fix the aluminum alloy pipe or copper plate with ropes installed above the door frame, and ground one end of the aluminum alloy pipe or copper plate. |
){kind=link}